This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

VPN Pass-through issues

Hi guys,

When I'm on the LAN side of the fence and want to VPN to the server on the outside world, can't reach it with the Cisco VPN client. Anyone know how to resolve this?

Thanks

This thread was automatically locked due to age.

Parents

0 apijnappels over 10 years ago

where are you trying to VPN to? Are you trying to VPN in to the network of the same UTM as where you're already connected at the inside or are you just trying to connect to some completely different (remote) VPN server?

Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 apijnappels over 10 years ago

where are you trying to VPN to? Are you trying to VPN in to the network of the same UTM as where you're already connected at the inside or are you just trying to connect to some completely different (remote) VPN server?

Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 jphebert over 10 years ago in reply to apijnappels

Trying to VPN to another VPN server (Cisco) which is another site from a laptop on my LAN protected by my Sophos UTM

Laptop ---> Sophos UTM ---> Internet ---> Cisco VPN server
Cancel
Vote Up 0 Vote Down

Cancel
0 jphebert over 10 years ago in reply to jphebert

Made 3 service definitions (1 for each port: 500,4500, 10000 UDP) and a Firewall rule allowing traffic to the IP address of the VPN server for my internal for these 3 service definitions.
Cancel
Vote Up 0 Vote Down

Cancel