This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

L2TP vpn can connect but can't access from remote network to internal network

Hi,

Im trying to accomplish L2TP vpn and it its successfully connected,however from the windows l2tp connection unchecking the "use default gateway of remote" giving me problem. i can't ping the internal pc from the remote network and vice-versa.

L2TP Connection pattern
remote pc -> DSL >>> (L2TP) >>> ASG -> INTERNAL NETWORKS =RTO

L2TP POOL =10.242.3.0/24
INT NETWORK = 192.168.1.0/24
REMOTE PC=192.168.0.1/24

Any help or suggestions is much appreciated.

Thanks

This thread was automatically locked due to age.

0 HenningE over 14 years ago

Sounds like you need to set up a route on the remote pc to 192.168.1.0/24 through 10.242.3.1 as the gateway. 10.242.3.1 is what the ASG will use in the L2TP pool.
Cancel
Vote Up 0 Vote Down

Cancel
0 BAlfson over 14 years ago

Hi, HenningE,

I think that route should be established when the L2TP connection is established. In the windows client, unchecking the 'use default gateway of remote' box should only affect reaching public IPs, not anything in 192.168.1.0/24.

Bhangki, have you allowed pings on the 'ICMP' tab of 'Packet Filter'?

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel