This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Open VPN to UTM - site to site

Hi, 

anybody got a site to site openvpn connection working with the UTM. I copied the certificates from the APC file using notepad++ but this didn't seem to work.

 

Louis



This thread was automatically locked due to age.
Parents Reply Children
  • I connected a Teltonika RUTX11 using the UTM as the server side (Fixed IP) and the RUTX11 as the client side (dynamic IP)

    This is configured as a site to site SSL VPN on the UTM (not Remote Access)

    Certs (CA & Cert + Key) were extracted using notepad++ from the downloaded apc file on the UTM.
    Username/Password was also extracted from this file.

    RUTX11 client side used TLS+Username/Password

    Works very well so far.

    The system above is a linux based system (as with most) so I imagine anything that has OpenVPN client on it will work. The trick was to extract the correct details from the apc file and also use TLS+password authentication on the client side. I'm not sure why Sophos make the site to site a little bit harder to configure if it's not another UTM?