This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to configure ssl-vpn to send all traffic through vpn tunnel ?

Right now the users can simultaneously access their local network as well as the vpn network.

Could someone help me to configure ssl-vpn in such a way that when a user is connected to vpn network the local network must be disabled and all the traffic should be sent via the ssl-vpn.

Thankyou.



This thread was automatically locked due to age.
  • Hi innov,

    if you want that all traffic goes to the vpn tunnel you have to set "any" as local network in the profile.

    But you cannot catch all the traffic from the client.
    The network where the client is located will never be send through the tunnel.

    For example:
    Client network: 192.168.0.0/24
    This network never goes trough the tunnel because this the clients local network.

    All other network request goes through the tunnel.

    Best Regards
    DKKDG

  • Hi DKKDG,

    Thankyou for your answer. To be more specific should I do it under Remote Access->SSL->New Remote Access Profile and under Local Network should I use any ?

    Is that correct?

     

    Kind Regards

    innov

  • That's correct

    Best Regards
    DKKDG

  • DKKDG's solution will work.  I usually prefer to use the "Internet" object and whichever local resources should be available.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA