This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Multiple Subnet over IPSEC

Hello!

We have an IPSEC VPN configured to a supplier. This allows traffic from our local 192.168.65.0/24 subnet to access a remote web server.

The main LAN is on 192.168.20.0/24 subnet.

Is there a NAT rule that can be setup to allow clients on the .20 subnet access to the remote server without changing their subnet, or fitting another LAN card?

Previously, this is how we resolved the issue - by connecting client machines to both subnets, and configuring a static route, so all traffic bound for the remote web server was forced over that specific interface/gateway.

Thanks!



This thread was automatically locked due to age.
Parents
  • Hi Damian and welcome to the UTM Community!

    DKKDG gave you the right prescription, and you didn't have 'Strict routing' selected in your IPsec Connection, so it worked as designed.

    Cheers - Bob
    PS Moving this thread to the VPN forum.

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • Hi Damian and welcome to the UTM Community!

    DKKDG gave you the right prescription, and you didn't have 'Strict routing' selected in your IPsec Connection, so it worked as designed.

    Cheers - Bob
    PS Moving this thread to the VPN forum.

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data