Monitoring bandwidth usage of IPsec vpn-utm9

Hi Sanil and welcome to thee UTM Community!

It's just a detail, but shouldn't your Traffic Selector be named "Outbound IPsec" instead?  In any case, I would do:

Outbound IPsec = Any -> IPsec -> {public IP of the other site}

The Bandwidth Pool probably shouldn't have an Upper Limit assigned and it must be on your External interface.

If you're still having a problem, please show us pictures of the Edits of the Bandwidth Pool, Traffic Selector and the External interface on the 'Status' tab.

Cheers - Bob

Hey Bob-  Thank you very much.

As you said traffic selector name is a Typing error, it is "outbound" only.

As suggested, I am adding some screenshots of config of both sides. I left the Upper bandwidth limit at external interface as default which is 1024 mbps because i don't want to limit my entire available width.

my concern is, how we can make sure this bandwidth pool is working and allocated bandwidth is available for IPSec?

Site-A (Initiator) (There is an option to specify upper bandwidth for bandwidth pool).

Site -B (Respond)

Thanks - Sanil

That looks fine, Sanil - is it doing what you want?

Cheers - Bob

That looks fine, Sanil - is it doing what you want?

Cheers - Bob