This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RED15 will not start properly

Hello everyone,

 

I am already running several REDs on my SG210 (UTM9). 

Now, I was trying to reactivate a previously used RED15 (yes, I entered the unlock code) but it appears to have some trouble during the boot process.

It's been configured in Standard/Split mode and all settings are correct from what I see (and compared to REDs that are working perfectly fine).

However, this one shows a certain order of LED blinking, which is not really listed in the Knowledgebase.

 

--> Power: Green (stable)

--> System: Green (stable)

--> Router: Green (stable)

--> Internet: Green (blinking)

--> Tunnel: Off

--> WAN: Green (blinking)

 

After going through this process twice and failing to get a stable LED on "Internet", "System" suddenly turns red until all LEDs extinct and only "Power" remains on (green, stable).

 

The RED is not being listed in the RED's live log during the whole process.

 

Thanks in advance!

 

Best,

Sebastian



This thread was automatically locked due to age.