Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 24 replies
  • Answers 1 answer
  • Subscribers 3 subscribers
  • Views 69068 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

QOS of Site-to-Site VPN Tunnels

rmanyc
Thanks for your help.

We have a backup application running from one site to another.   Both sides are connected via ASG 110 and ASG 120 IPSec site-to-site (s2s) VPN.   We have QOS running successfully for our normal traffic (i.e. http to web, smtp to web, etc.).  However, I am having difficulty applying QOS rules to the s2s VPN.   I am not sure how to structure them.  I have read that QOS is applied to outbound traffic, but apparently the traffic is encrypted prior to hitting the QOS.  How exactly should I go about configuring the box to apply QOS to all s2s traffic?   How would I do it for specific (i.e. Http) traffic inside the s2s tunnel.   Is there something I am missing?

Any help is appreciated!

Thanks.


This thread was automatically locked due to age.
Parents
  • 0
    "Any" or "External" make no difference (just tried)
    When I did the change, I tested, the phone traffic uses SSL line, and data uses IPSec.
    There is no SSL traffic other than VoIP right now, and voice is still scrambled when data traffic is high.
Reply
  • 0
    "Any" or "External" make no difference (just tried)
    When I did the change, I tested, the phone traffic uses SSL line, and data uses IPSec.
    There is no SSL traffic other than VoIP right now, and voice is still scrambled when data traffic is high.
Children
No Data
Unfiltered HTML