This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SSL Termination on Sophos

Hi all,

I run a Sophos SG105 UTM 9.702-1.

I have a service (S3 server) that is not configured to handle SSL.

I have configured to access the service with HTTP by setting the endpoint (external request) to my Sophos firewall and adding some DNAT to my server. All works fine so far.

Now I want to switch to HTTPS. My S3 server does not support SSL (as it is protected from Internet). Therefore I would like to terminate SSL connection within Sophos (configured with Letsencrypt) and forward simple HTTP protocol to my S3 server. 

I couldn't figure out on how to configure this within my SG105.

Any help highly appreciated. Thanks,

Wolfram 



This thread was automatically locked due to age.
Parents
  • Hello,
    The magic word is "Webserver Protection".
    Within "RealWebserver" you have to configure the connection to your physical WebServer using Port 80.
    Afterwards you configure the Virtual-Webserver. The one you reach from external via TCP443/SSL.
    Interface is the "external" reachable interface, Type HTTPS or HTTPS+Redirect (http is redirected to https).
    Select the certificate and afterwards domain
    ... Thats nearly all.

    Now you can configure and add firewall profiles, Authentication, ...


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

  • Hi Dirk,

    thanks a lot. So I need to extend my license. 

    Sounds like a plan.

    Many Tahnks!

Reply Children
No Data