This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM - Multiple WAN connections with separate LANs

Hello everyone,

currently we have a simple setting with a SG210, one LAN (192.168.10.x) and one internet connection (WAN interface). Everything is working great!

However, because we are in the countryside our internet is quite slow (only 6 MBit/s). So we plan to get 2 more internet connections.

Would it be possible to add the 2 more internet connections to the SG and also create two additional LANs such as "Guest (192.168.20.x)" and maybe one more, lets say "LAN Test (192.168.30.x). Each LAN is connected to its own physical switch.

Each LAN should be separate and isolated. No traffic allowed between the LANs. Each LAN gets its own WAN connection associated. No failover is needed.

LAN1 => WAN1

Guest => WAN2

LANTest => WAN3

Would that be possible? If I understand it correctly then all 6 ethernet ports of the SG would be used in this scenario.

Thank you in advance for your help!

Greetings Aktuator



This thread was automatically locked due to age.
Parents Reply Children