This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cisco VPN client access to UTM is ok, but can't route out?

Hi,

I can successfully connect to my UTM9 using the Cisco VPN client on my IOS device. 
I can ping internal ip's (192.168.0.0/24 range) and the public IP adress as well from my IOS device.

But I can't access any public IP's, let's say 1.1.1.1 for example, just the internal IP's.

Do I have to setup anything specific probably?

I can ping 1.1.1.1 directly from any internal IP's, but not from my IOS device that connects using the Cisco VPN ipsec tunnel.

Please help ;)



This thread was automatically locked due to age.
  • Hi  

    Have you configured any Masquerading rule for the Cisco VPN Pool? Please configure a Masquerading rule and make sure that you have created a Firewall rule as well for Cisco VPN Pool to go out on the Internet.

    Kindly check this and let me know if it helps.

    Regards

    Jaydeep

  • Salut Guenther and welcome to the UTM Community!

    Do you have "Internet IPv4" in 'Local Networks'?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA