Thread Info
  • State Suggested Answer
  • +4 person also asked this people also asked this
  • Locked Locked
  • Replies 62 replies
  • Answers 2 answers
  • Subscribers 13 subscribers
  • Views 70666 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Upgrade to UTM 9.601-5 firmware doesn't start FW NAT rules on boot

Daniel Huhardeaux

Hi,

I got information from my UTM that a new firmware 9.601-5 was available. I installed it and after reboot I discover that all my NAT rules where not activated ! I had to go on each one and disable/enable them to get back the working setup :(

I did it with some of them and then reboot the UTM: again rules where not applied. Disable/enable them and evrything is OK.

For some rules I didn't apply the "automatic firewall rules" in GUI but had create myself the FW rules: those NAT rules where activated. But for NAT rules with forwarding ports to other physical hosts but *not the host himself and the VMs running on it where the UTM lies* doesn't matter which setup (manual or automatically), I have to activate "automatic FW rules" and disable/enable the rules to get them working.

No need to say that prior firmware versions didn't had this problem.

Does anyone face the same problem and confirm?

Daniel



This thread was automatically locked due to age.
Parents
  • 0

    Issue still present in release of 9.7

    As a reseller/partner I lodged a support request with Sophos AU that "This was supposed to be fixed in 9.7 - I have just updated some client devices to 9.700-5 and this issue is still present in these devices" -

     

    I heard back 6 days later :

     "Appreciate your patience we checked as mentioned in the KB the issue will be resolved in the UTM firmware version 9.7  which is already released. Would request you to please update the firmware version to 9.7 to resolve the issue"

     

    So, nothing done yet - and I am not sure why they think it's fixed,  when it clearly isn't.   

    Grant

Reply
  • 0

    Issue still present in release of 9.7

    As a reseller/partner I lodged a support request with Sophos AU that "This was supposed to be fixed in 9.7 - I have just updated some client devices to 9.700-5 and this issue is still present in these devices" -

     

    I heard back 6 days later :

     "Appreciate your patience we checked as mentioned in the KB the issue will be resolved in the UTM firmware version 9.7  which is already released. Would request you to please update the firmware version to 9.7 to resolve the issue"

     

    So, nothing done yet - and I am not sure why they think it's fixed,  when it clearly isn't.   

    Grant

Children
No Data
Unfiltered HTML