We'd love to hear about it! Click here to go to the product suggestion community
I got information from my UTM that a new firmware 9.601-5 was available. I installed it and after reboot I discover that all my NAT rules where not activated ! I had to go on each one and disable/enable them to get back the working setup :(
I did it with some of them and then reboot the UTM: again rules where not applied. Disable/enable them and evrything is OK.
For some rules I didn't apply the "automatic firewall rules" in GUI but had create myself the FW rules: those NAT rules where activated. But for NAT rules with forwarding ports to other physical hosts but *not the host himself and the VMs running on it where the UTM lies* doesn't matter which setup (manual or automatically), I have to activate "automatic FW rules" and disable/enable the rules to get them working.
No need to say that prior firmware versions didn't had this problem.
Does anyone face the same problem and confirm?
In reply to Daniel Huhardeaux:
Daniel Huhardeauxthis morning I got answer from Sophos France support: working on our logs they found the problem which should be resolved with version 9.7 expected current october.
9.7 seems to be pre-release ; I cant find an English readme or bugfix
Has anyone with access to 9.7 got confirmation on whether this is fixed yet - I have dozens of UTMs ready for updates but I am unwilling to update them if I then need to login to each one manually and STOP/START NAT Rules!
In reply to GrantAU:
Sophos seem to have acknowledged it in KB Article 134544 :
I can confirm not fixed in 9.700-5
Thanks for the feedback.I guess I will have to do it manually for a while again...Regards,DeltaSM
In reply to DeltaSM:
If you don't want to wait till a solution is published you can set yourself FW rules and disable the "automatic create fw rules" switch.
Daniel - thanks for that info - I wasn't aware you could do that - I may need to do that to some of the clients who seem to need to reboot their UTM often (usually to get 4G USB Dongles to "reconnect") - but doing this to all my client devices will take hours and is just not possible. Sophos should fix this.
Issue still present in release of 9.7
As a reseller/partner I lodged a support request with Sophos AU that "This was supposed to be fixed in 9.7 - I have just updated some client devices to 9.700-5 and this issue is still present in these devices" -
I heard back 6 days later :
"Appreciate your patience we checked as mentioned in the KB the issue will be resolved in the UTM firmware version 9.7 which is already released. Would request you to please update the firmware version to 9.7 to resolve the issue"
So, nothing done yet - and I am not sure why they think it's fixed, when it clearly isn't.
Are you saying that the issue is the automatic firewall rule? Do you see a default drop in the Firewall log (the KB article is misleading for the reasons I mention in the ? If you look at the automatic rule on the 'Firewall' 'Rules' tab, does everything seem to be correct? At the command line, is the 'status' of the rule 1?
Cheers - Bob
In reply to BAlfson:
yes, on automatic FW rules and yes, everything is OK in the 'Rules' tab (remember, it was working before I opened this thread connected to the 9-601-5 upgrade).
This WE I upgraded an software UTM to 9.7-5 and problem disappears. Only thing is that after startup, it takes few minutes before rules are applied. I will check on the others I have not yet upgraded to confirm this.
Just an update :
After being told by Sophos SUpport AU 7-Nov that this was resolved in 9.700-5 and then confirming with them is wasn't actually fixed, I heard back from Support a few more weeks later 5-Dec:
I did some more research on this case and found it to be published already in the known issues list for the UTM with ID : NUTM-11201 This issue should be fixed in the 9.701 MR1 which most probably gonna release in this month though no any exact date provided. Please refer below known issue list details
So it seems 9.701 MR1 will contain the "real" fix
Is there any publicly accessible FTP site that has earliest accessto UTM updates? Can resellers join a beta program to access such?
Nothing special for us, Grant. The availability for download prior to release will be announced here and in 'RELEASE NOTES & NEWS' at the top. Tips & Tricks - How to Participate Efficiently Here might interest you.
Daniel HuhardeauxThis WE I upgraded an software UTM to 9.7-5 and problem disappears. Only thing is that after startup, it takes few minutes before rules are applied. I will check on the others I have not yet upgraded to confirm this.
I understand what happends: problem is NOT solved and there is no delay. To get it work you only need to disable/re-enable one rule and automagically all others are applied ! Doesn't matter which one you treat.