Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 4 subscribers
  • Views 6086 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Interface Routing Works From UTM out, not to UTM

Tony C

Hey Everyone, 

 

     I'm trying to setup a static route to another network in the same location. I'm not looking for LAN 1 to use LAN 2 as a gateway (or vice versa)

 

Essentially this is the setup. 

 

Lan 1 (FiOS with Netgear X10) 

192.168.1.x

 

Lan 2 (UTM-9)

192.168.2.x

 

I setup static routing on the netgear (screenshot: https://www.dropbox.com/s/64phpik7j7gslfw/Screenshot%202018-03-04%2010.51.18.png?dl=0)

Here is the LAN setup (with RIP info) (Screenshot: https://www.dropbox.com/s/99hxkoe2y990uz0/Screenshot%202018-03-04%2010.53.47.png?dl=0)

I setup static routing on the UTM-9 (screenshot:  https://www.dropbox.com/s/8hyfzj69i2gdngn/Screenshot%202018-03-04%2010.52.51.png?dl=0)

 

On Lan 2, I can connect to Lan 1's router. 

On Lan 1, I cannot connect to any asset on Lan 2. 

Here is the only firewall entry made: (screenshot: https://www.dropbox.com/s/7e7z12s3i18gr9a/Screenshot%202018-03-04%2010.56.09.png?dl=0)

NAT Masquerading rules *Note I've tried it enabled and disabled to no avail* (Screenshot: https://www.dropbox.com/s/b9qpiuvyyud9b3u/Screenshot%202018-03-04%2010.56.39.png?dl=0)


Clearly I am missing something but don't know what that may be. Any help and guidance is super appreciated in advance. 


Thanks

 



This thread was automatically locked due to age.
Parents
  • 0

    Hi Tony and welcome to the UTM Community!

    If the prescription from oldeda didn't fix you up, others will need to look at your pictures.  Please Edit your post and insert your images into the post here and remove the external links to Dropbox content. We can't know if that is properly protected. The only malware I've gotten in over 10 years was from an external link to a picture in this forum several years ago.  Thanks in advance!

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0

    Hi Tony and welcome to the UTM Community!

    If the prescription from oldeda didn't fix you up, others will need to look at your pictures.  Please Edit your post and insert your images into the post here and remove the external links to Dropbox content. We can't know if that is properly protected. The only malware I've gotten in over 10 years was from an external link to a picture in this forum several years ago.  Thanks in advance!

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML