Hey Everyone,
I'm trying to setup a static route to another network in the same location. I'm not looking for LAN 1 to use LAN 2 as a gateway (or vice versa)
Essentially this is the setup.
Lan 1 (FiOS with Netgear X10)
192.168.1.x
Lan 2 (UTM-9)
192.168.2.x
I setup static routing on the netgear (screenshot: https://www.dropbox.com/s/64phpik7j7gslfw/Screenshot%202018-03-04%2010.51.18.png?dl=0)
Here is the LAN setup (with RIP info) (Screenshot: https://www.dropbox.com/s/99hxkoe2y990uz0/Screenshot%202018-03-04%2010.53.47.png?dl=0)
I setup static routing on the UTM-9 (screenshot: https://www.dropbox.com/s/8hyfzj69i2gdngn/Screenshot%202018-03-04%2010.52.51.png?dl=0)
On Lan 2, I can connect to Lan 1's router.
On Lan 1, I cannot connect to any asset on Lan 2.
Here is the only firewall entry made: (screenshot: https://www.dropbox.com/s/7e7z12s3i18gr9a/Screenshot%202018-03-04%2010.56.09.png?dl=0)
NAT Masquerading rules *Note I've tried it enabled and disabled to no avail* (Screenshot: https://www.dropbox.com/s/b9qpiuvyyud9b3u/Screenshot%202018-03-04%2010.56.39.png?dl=0)
Clearly I am missing something but don't know what that may be. Any help and guidance is super appreciated in advance.
Thanks
This thread was automatically locked due to age.