This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

QoS doesn't seem to work properly

Hi everybody !

 

I encounter some trouble to configure QoS on my SOPHOS UTM.

 

Here are the problem :

- I followed step by step this "how to" to create my QoS rule :

  * I created a Traffic selector rule (source : InternetIPv4, service : all, destination : my lan)

 

  * Then I created a Download Throttling rule with a limit set to 4096 Kbit/s, limit shared with all the host on the network

 

  * I activated QoS on both interface (WAN and LAN)

 

- When I check my download speed thanks to speedtest.net, I've the correct speed (4Mb/s - 512KB/s), but when I download a big file (~2GByte), the UTM doesn't do his job and I get my file under 5 minutes (download speed ~15MByte)

(Mo/s = MB/s)

 

So what did I do wrong ??

 

Thanks a lot for your answers !!

 

P.S. : thinking to a problem with the firmware, I upgraded it to the last one published (9.506-2), but my problem is still present :/



This thread was automatically locked due to age.
  • Salut Jean-Charles and welcome to the UTM Community!

    Try with your Traffic Selector in a Bandwidth Pool with an upper bandwidth limit on the Lan_Pedagogique interface.  Any better luck with that?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • Hello Bob !

    Thanks for the tip.

    Sorry for the late answer, I was pretty busy lately.

    I'll try that as soon as possible and I'll keep you posted.

     

    Regards.