Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 4 subscribers
  • Views 6594 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

CLI - Display WAN IP

zeus1976

Hello,

I have installed a new VM with Sophos UTM. If i check the CLI i see "All configuration is done with WebAdmin. Go to https://80.x.x.x:4444 in your browser".

Question: Why is here not the LAN IP displayed?

After some Port Scan and try to access with the WAN IP - nothing is working - seem to be good - but i'm little a bit confused about the message.

Thank you for the feedback.

Best regards

 

PrintScreen:



This thread was automatically locked due to age.
Parents
  • 0

    Oops!  You configured the Internal interface with the IP you want on your External interface.  Change your client PC to have an IP of 80.x.x.y, connect to eth0 and you should be able to login.

    I would do a factory reset immediately and then configure the LAN interface correctly.

    Alternatively, you could login as root at the command line,

    edit /etc/udev/rules.d/70-persistent-net.rules

    Save that file and

    reboot

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    Hi,

    I solved the problem a time a go but i forgot to write back - it was a problem with the vitualization.

    Best regards

Reply Children
No Data
Unfiltered HTML