This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Internal Dns issue on UTM 9

I`m trying to setup UTM 9 as internal DNS server but whenever, i ping any device e.g, workstation1 it doesn't automatically assign domain suffix to it. It should automatically assign domain suffix e.g company.com and make it workstation1.company.com. I`ve set UTM host name to company.com but still unable to get any result. I don`t want to go adding static mapping route.

Can anyone shed some light on how to resolve this?



This thread was automatically locked due to age.
Parents
  • You might want to take a look at DNS best practice.

    From where are you pinging - the UTM or from a PC?

    Do you have a request route configured for your local domain, or do you not have an internal DNS server?

    Are you using the UTM's DHCP server?  If so, have you configured the domain there?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • Im pinging from pc1 to pc2. Ping does work no issue.

    Im using internal dns server.

    I've domain name configured under dhcp in UTM.

    Issue im facing is

    That on pinging any client i dont get auto domain name suffix.

Reply Children
  • Add MYDomain.local in request Routing with a reference to the Domain Server Hosting DNS. I would Always use an internal Windows DNS Server as well. The UTM can act as DNS Server

    but still when i can i avoid it i use Windows DNS Servers.

    Regards

    Jason

    Sophos Certified Architect - UTM