This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

cyberoam

Hi guys , so basically the scenario is i changed the Wan link but kept the same ip on the new link  (so no changes had to be made on the firewall )

but inturn my Vpn stayed up but Lan was not getting dhcp , so i put my self on a static ip and tried to log onto the firewall but after about 6 or 7 

attempts with incorrect username and password the firewall became completely unresponsive  , i was able to ping the firewall but unable to access either of the WEB interfaces 

biggest issue being that the Lan had no dhcp and was completely unresponsive

 

what can cause this ?



This thread was automatically locked due to age.
  • Hi Kyle and welcome to the UTM Community!

    Yes, this is for UTM, not Cyberoam.  You will want to pose your question in that forum.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA