We'd love to hear about it! Click here to go to the product suggestion community
Sophos UTM 220 rev 5 *UNOFFICAL* Hardware Upgrade Checklist
Not very much information is available on these hardware appliances. For the longest time searching, all I personally could find was information relating to RAM (which at the time was 4GB). So I figured I would start the trek of finding out what this appliance is capable of (Don't ask, I've always done this for almost every piece of equipment I have owned, regardless of practicality). A forethought though. Your appliance MUST BE in the STOCK configuration in order to install UTM 9.X. Once the installation is complete however, you are able to swap components out without issue. All testing so far has been done with the UTM 9.5 installation.
So lets begin. Stock 2x1GB sticks of DDR3 RAM and a "wonderful" LGA775 Celeron E1500 @ 2.2GHz from the Conroe family
Core 2 Duo SLA94 E4600 2.4GHz (Conroe) - BIOS Boot/UTM Boot
Core 2 Duo E8400 3.0GHz (Wolfdale) - NO BIOS Boot/No UTM Boot
Kingston Hyper X Blu. (2x4GB) DDR3 1600 PC3 12800 (KHX1600C9D3B1K2/8GX) - BIOS Boot/UTM Boot - 8GB system detected @ 800MHz (using C2D E4600)
I will be expanding this list at a later point as I test out different CPUs and RAM. From initial testing it appears as though these mainboards may only accept Conroe based 775 chips. Also I would like to point out, that with the CPU upgrade the appliance now handles more than the 4GB that was thought previously. I have only tested up to 8GB RAM as I do not have any 8GB sticks i can throw at it.
8GB RAM should also be possible with the Stock CPU.
In reply to LA:
Thanks again, pflicht. That will make a lot of used 220s good tools for home use!
Warning to those with a 220 under warranty - just opening the case voids the warranty.
Cheers - Bob
Thank you for testing this. I also own a 220r5 and would like to follow a similar path since I own one of these for my home. Not really concerned with support. Any other modifications please share. It’s rather interesting. Can’t wait to see what other parts you try!!
In reply to chris johnson1:
I recently bought me a few utm220 boxes.
First I did notice are the loud fans. i am planning to install two 40*40*20 noctua fans but then still thes powersupply fan is loud. I ordered a pico 180w psu. A small 180w psu.
I plan to replace the hdd for ssd.
I had a few processors so I tested the E5800 ok. Then a Q9550 quadcore this worked aswell no errors.
I ordered the kingston 8gb when its here I test with that aswell.
I did see 3* sata onboard and the bios supports raid ?!
A little overkill
In reply to Renede Bie:
Just bought the kingston memory above but with the E1500 or Q9550 it doesnot boot with 8MB.
The q9550 can only boot with 2x1GB
The E1500 or and E2160 can boot with 2x2GB
Got it working with Intel e5800 and kingston 2*4gb
Here a small video of my UTM220 upgraded and 100% silent.