This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

After up2date, slave node death

 Hi, after the reboot of the slave node after the up2date from 9.413-4 to 9.500-9 release, the boot stops with this error

If I try the command fsck /dev/sda6

$ sh: fsck.ddf_raid_member: not found

Any idea?

The node master is running ok.

Thanks.



This thread was automatically locked due to age.
Parents Reply
  • I contacted the sophos technical support but could not give me support because it was not possible to connect it remotely to a PC that I connected via the serial port to the slave node, then I decided to reinstall the slave node and rebuild the cluster.

    I tried connecting from a pc to the master node (that worked perfectly) but not even there it was possible to connect via serial port.
    Do I think it's only possible with appliances?

Children