This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos UTM 9.5 released - let's share experience :-)

https://community.sophos.com/products/unified-threat-management/b/utm-blog/posts/utm-up2date-9-500-released

 

What’s new in UTM 9.5?

  • WAF Enhancements

WAF URL Redirection gives you the ability to redirect traffic for a WAF protected URL to a different backend system or URL.

Configure minimum allowed TLS version to improve security.

WAF protection and authentication policy templates were added for common Microsoft services for protection and authentication.

True File Type Scanning to be able to block uploads based on MIME type.

WAF Proxy Protocol Support to use the client IP info inside the ProxyProtocol header to make policy decisions and improve logging.

  • Sophos Sandstorm

Datacenter location selection for Sophos Sandstorm without relying on DNS based location detection.

Scan exceptions for Sophos Sandstorm to exclude specific filetypes from being sent to Sophos Sandstorm analysis.

  • REST API

RESTful API to configure Sophos UTM 9.

  • Base System

Certificate Expiration Notification 30 days before expiration date via WebAdmin and e-Mail to be able to react early on certificate renewal.

Support Access with SSH is extending the existing Support Access feature.

64-bit PostgreSQL Database to generate reports with big datasets faster. Existing database will be migrated without loosing any data.

SNMP Monitoring of full filesystem to integrate UTM filesystem monitoring in regular SNMP based monitoring solutions.

Download all UTM logs in a single archive.

Up2Date Information

News

  • 9.5 Release
  • Features
  • WAF URL redirection
  • WAF configurable TLS version
  • WAF true file type detection
  • WAF templates
  • Sophos Sandstorm configuration of data center
  • Sophos Sandstorm file exceptions
  • RESTful API to configure UTM
  • AWS CloudWatch Logs Agent
  • 64-bit PostgreSQL database
  • Email notification for expiring certificates
  • Support Access for SSH
  • SNMP monitoring of the file system

Remarks

  • System will be rebooted
  • Configuration will be upgraded
  • Connected REDs will perform firmware upgrade
  • Connected Wifi APs will perform firmware upgrade

Bugfixes

  • NUTM-6646 [AWS] REST API panic when unlocking unlocked mutex
  • NUTM-6657 [AWS] Configure AWS profiles via WebAdmin
  • NUTM-6696 [AWS] Configure CloudWatch support via WebAdmin
  • NUTM-6708 [AWS] Cloud update not working with conversion deployments
  • NUTM-6814 [AWS] Rest API is accessible with default password if basic setup has not completed
  • NUTM-6887 [AWS] REST API panic when inserting into node which is not of type array
  • NUTM-7032 [AWS] SignalException not handled for SecurityGroupsManagement#update
  • NUTM-7055 [AWS] queen_configuration_management / aws_resource_management SIGUSR1 handling
  • NUTM-7056 [AWS] LocalJumpError
  • NUTM-7057 [AWS] aws_set_sd_check AWS::EC2::Errors::RequestLimitExceeded
  • NUTM-7061 [AWS] Connection refused - connect(2) for "localhost" port 4472
  • NUTM-3194 [Access & Identity] incorrect SSH logins trigger backend authentication requests
  • NUTM-3222 [Access & Identity] RED10/50: DNS port open on WAN interfaces
  • NUTM-3260 [Access & Identity] User Portal - IPsec Windows Support
  • NUTM-4149 [Access & Identity] [RED] Use Sophos NTP pool servers
  • NUTM-4323 [Access & Identity] NULL pointer deref in red_nl_cmd_tunnel_dump
  • NUTM-4705 [Access & Identity] Don't use DNS server from the RED branch as an ISP forwarder
  • NUTM-4852 [Access & Identity] [RED] flock() on closed filehandle $fhi at /</var/confd/confd.plx>Object/itfhw/red_server.pm line 563.
  • NUTM-4994 [Access & Identity] STAS creates users even if automatic user creation is disabled
  • NUTM-5134 [Access & Identity] [OTP] User Portal should recommend Sophos Authenticator
  • NUTM-5925 [Access & Identity] [RED] prevent configuration for VLAN for Split modes
  • NUTM-6387 [Access & Identity] HTML5 VNC connection not disconnecting
  • NUTM-6641 [Access & Identity] [OTP] user can select algorithm for automatic tokens
  • NUTM-6668 [Access & Identity] [IPsec] L2TP/Cisco policy changes do not update ipsec.conf
  • NUTM-6749 [Access & Identity] RED15w does not send split DNS traffic over RED tunnel
  • NUTM-5965 [Basesystem] Sensors command on SG125w doesn't show hardware fan RPM
  • NUTM-6468 [Basesystem] BIND Security update (CVE-2016-9131, CVE-2016-9147, CVE-2016-9444)
  • NUTM-6718 [Basesystem] Update NTP to 4.2.8p9
  • NUTM-6846 [Basesystem] Linux kernel: ip6_gre: invalid reads in ip6gre_err() (CVE-2017-5897)
  • NUTM-6847 [Basesystem] BIND Security update (CVE-2017-3135)
  • NUTM-6902 [Basesystem] Linux kernel: ipv4 keep skb->dst around in presence of IP options (CVE-2017-5970)
  • NUTM-7048 [Basesystem] Implement software workaround for Intel CPUs
  • NUTM-7067 [Basesystem] Update OpenSSH to openssh-6.6p1
  • NUTM-7370 [Basesystem] Bootsplash still shows 9.4 instead of 9.5
  • NUTM-7653 [Basesystem] Internal SSL certification verification broken
  • NUTM-5658 [Confd] Stripped restore unaccessable if default internal interface is removed
  • NUTM-3062 [Email] Mails From mail spool gets quarantined because of "500 Max connection limit reached" in cssd
  • NUTM-4753 [Email] Support recipient verification with multiple AD servers
  • NUTM-5350 [Email] Per user blacklist does not apply until smtp service restarts
  • NUTM-5823 [Email] Scanner timeout or deadlock for all mails with a .scn attachment
  • NUTM-5892 [Email] SMTP Exception doesn't allow '&' sign within the email address
  • NUTM-6135 [Email] DLP custom expression doesn't get triggered if the email body contains certain strings
  • NUTM-6355 [Email] Email not blocked with expression list
  • NUTM-4474 [Kernel] Kernel panic - not syncing: Fatal exception in interrupt
  • NUTM-6358 [Kernel] Kernel: unable to handle kernel NULL pointer dereference at 0000000000000018
  • NUTM-4969 [Network] Uplink does not recover from error state
  • NUTM-5314 [Network] 10gb SFP+ flexi module interface fails when under load
  • NUTM-5428 [Network] Bridge interface can not acquire Dynamic IPv6 address correctly. This interface repeats up/down.
  • NUTM-5831 [Network] Changing static IP on interface does not take effect immediately
  • NUTM-5861 [Network] IPv4 static address gets deleted from confd (and WebAdmin) once IPv6 on the same interface fails to obtain dynamic address
  • NUTM-6077 [Network] Static route on bridge interface disappears after rebooting the UTM
  • NUTM-6807 [Network] SSL VPN not being redistributed into OSPF
  • NUTM-6901 [Network] Eth0 is removed while configuring bridge interface
  • NUTM-2420 [WAF] Remove session management from basic authentication
  • NUTM-5603 [WAF] Issue with expired lifetime of WAF connections without any hint
  • NUTM-5628 [WAF] WAF - Provide import and export options for HTTPS domain list
  • NUTM-5640 [WAF] GUI issue when adding wildcard certificate into Virtual Webservers
  • NUTM-6156 [WAF] UTM still fails scan for CVE-2016-2183 (SWEET32) after update to 9.408
  • NUTM-6294 [WAF] WAF - Naming collisions for default profiles
  • NUTM-6522 [WebAdmin] SMC Test failed after Settings are applied
  • NUTM-6788 [WebAdmin] Add support for SG105W, SG135W and SG230 in WebAdmin
  • NUTM-7337 [WebAdmin] Fix appliance picture for SG105w N9
  • NUTM-6467 [Web] FTP connection fails when using transparent FTP Proxy
  • NUTM-6732 [Web] Certificate issue with transparent Web Proxy - "unable to get local issuer certificate"
  • NUTM-6876 [Web] Remove insecure RC4 from default cipher list for Web Protection HTTPS scanning on upgrade to 9.5 or restore of pre-9.5 backup
  • NUTM-7586 [Web] Chrome v58 and higher fail verification with HTTPS scanning enabled
  • NUTM-5638 [WiFi] RED15w - integrated AP isn't shown as pending in transparent / split mode
  • NUTM-5786 [WiFi] RED15w - if more then one SSID is configured only one is working correctly
  • NUTM-6215 [WiFi] Issue when roaming between wireless with some clients
  • NUTM-6335 [WiFi] VLAN fallback not working for integrated AP from RED15w
  • NUTM-6448 [WiFi] AP55 stuck as inactive
  • NUTM-6511 [WiFi] AP does not get IP address on 100 Mbit ethernet link

Download

While the release is in soft-release phase, you can find the up2date package on our FTP server at:

File size: ~301MB



This thread was automatically locked due to age.
Parents Reply Children
  • Thanks for the tip, I will contact support now :)

  • They just finished installing the SSO patch a few minutes ago. 

    So far, so good.

     

    An interim fix was to remove the UTM from the domain. 

     Definitions & Users

        Authentication Services

            Single Sign On Tab

              You remove the UTM by typing in the wrong user password. You will get a failed message, but that removes it. Do it again with the correct password and it will rejoin the domain.

    That fix worked for a few hours, then it would act up again.

     

    My workaround was to write a Web Filtering Exception that skipped authentication. Not the best solution, but we had to stay in business.

  • The patch seems to have solved the SSO issue.

    Their internal tracking number on this issue was NUTM-7960. 

     

  • SSO patch is still working.

    Per Sophos: "In addition, UTM firmware version 9.502 should have the fix embedded and is planned for release around mid July."

  • Thanks for this update, and the following one.  I was given the same bug number but haven't been given the patch or even been told about it.  Emailed support on Tuesday but so far had no response.  Dissapointing that Sophos don't seem to be very proactive on offering said fix to affected customers...

  • Steve, I think Support is being buried by this, so you just need to be politely insistent, as in the squeaky wheel gets the grease.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • I'm getting two different errors now.

    Http proxy not running - restarted
    --
    HA Status : HA MASTER (node id: 1)
    System Uptime : 2 days 22 hours 46 minutes
    System Load : 3.22
    System Version : Sophos UTM 9.501-5

    I was getting this before the update (it was actually the motivation behind updating)


    Also,

    Support access daemon not running - restarted
    --
    HA Status : HA MASTER (node id: 1)
    System Uptime : 3 days 21 hours 56 minutes
    System Load : 1.10
    System Version : Sophos UTM 9.501-5

    This one is new. I just opened a ticket.

    No user reported issues on these.

     

  • I wanted to post this so it came up in people's Google results.

    The "Client Authentication daemon not running" error that people are getting is ALSO the same service you need to run STAS on the UTM device.  It's the service that's responsible for the daemon listening on udp/6060 on the UTM.

    So if anybody is having trouble running STAS to authenticate users, you also need to set the HA explicitly to off if you're not using HA.  STAS should start working in a few minutes after that.

    Hope this helps somebody.

    Thanks!

  • Try restoring the config backup made before the last Up2Date application.  If that doesn't work, I'd consider re-imaging from ISO and restoring.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA