Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 4 subscribers
  • Views 1405 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Kernal panic - not syncing during Sophos UTM 9.6 installation

Chris Purves

Installing UTM 9.605, during the installing packages phase (step 4 of 6) I get the following error:

Kernel panic - not syncing: Fatal exception in interrupt

Installing onto a Qotom Q355G4 if that helps.



This thread was automatically locked due to age.
Parents
  • 0

    I was able to get past the error by pressing F3 at the first installation prompt to open the troubleshooting suggestions and entering the following kernel options:

    boot: default nolapic noapic

    After that the installation completed without error

Reply
  • 0

    I was able to get past the error by pressing F3 at the first installation prompt to open the troubleshooting suggestions and entering the following kernel options:

    boot: default nolapic noapic

    After that the installation completed without error

Children
  • 0 in reply to Chris Purves

    Classy - you solved the problem and came back to help others!

    Hi Chris and welcome to the UTM Community!

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Unfiltered HTML