We'd love to hear about it! Click here to go to the product suggestion community
i see very high RAM Usage on my UTM
Why my RAM spike on 00.00/06.00/12.00/18.00/24.00 ?
Command Free on command line when Ram spike
Graph 2 days
Graph 30 days
check some other SG 9.605.
Don't see this in local reporting.
Do you see the memory usage within local reporting too?
You may use TOP tool at your device and press "M" for sorting by memory-usage.
Seem some process is "eating" your memory an at 0/6/12/18 you get this memory back. (process is terminated or internal clenup run)
Do you alter/install something within your SG from CLI?
In reply to dirkkotte:
Hi Dirk,Do you see the memory usage within local reporting too?
On Time : 8.29
>>>>>>> NO ,
In reply to ITS HENGLEASING:
Wich device-type do you use?
Hi and welcome to the UTM Community!
Please show the CPU Usage graph from Reporting in the UTM for 9/11. Also a screencap of your settings on the 'Configuration' tab of 'Up2Date'.
Cheers - Bob
In reply to BAlfson:
Hi Bob, Sorry for late reply Management ->Up2Date ->Configuration
graph ram 9/11
graph cpu 9/11
Hi Dirk,i'm use Sopho SG330
I wanted to see if the graph in 'Logging & Reporting >> Hardware' for 9/11 matched the one you posted.
These look like graphs from PRTG, is that correct? I never got mine to read the UTM correctly, and stopped using it.
graph day 9/11
In reply to Amodin:
These look like graphs from PRTG, is that correct?
yes graph on PRTG
i check my graph ,Physical memory on PRTG is equal to check on top ,ssh
PRTG physical memory graph
available memory 2500
and report from top ,ssh
We need to see graphs for the same time frame from PRTG and the UTM:
to day (+07.00)
Some of the issue that you are showing here are for one, your interval in PRTG. You have it going every 30 seconds, so you are going to get a drilled down, more specific graph. UTM's graphs are not that frequent and are going to show usage more... spread out and even. This makes it more difficult to read and compare the PRTG/UTM intervals. I *think* UTM is every couple of hours by default (Ask someone on that). So, the spikes using PRTG are going to be more obvious and predominant.
I'd like to see the apples to apples comparison of that for what you posted.