Hi, I installed the UTM Software on an apu1d4.
It works quite well so far but there are two things that bother me.
First thing is the data disk. I have a 16GB msata installed in the system but the UTM installer didn't use all of the space.
Especially the data disk is pretty small and thus almost full. I did a rebuild of the postgres db, that helped a little. Don't know how long it will last till I have to rebuild the db again but I don't want to loose all of my logs all the time.
So, is there anybody who can tell me, how I can resize the data disk without reinstalling?
The problem with intalling on the apu1d4 is that it does not have a vga port, only a console port and since the utm installer does not send output to the seriell port I have to install it blind with a parallel installation in a vm so I can kind of see what I am doing. :-)
Here is the output from df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda6 5.2G 2.3G 2.7G 47% /
udev 2.0G 104K 2.0G 1% /dev
tmpfs 2.0G 0 2.0G 0% /dev/shm
/dev/sda1 331M 16M 295M 5% /boot
/dev/sda5 1.5G 619M 745M 46% /var/storage
/dev/sda7 1.9G 117M 1.7G 7% /var/log
/dev/sda8 535M 7.4M 488M 2% /tmp
tmpfs 2.0G 0 2.0G 0% /var/sec/chroot-httpd/dev/shm
tmpfs 2.0G 0 2.0G 0% /var/storage/chroot-reverseproxy/dev/shm
tmpfs 2.0G 32K 2.0G 1% /var/storage/chroot-smtp/tmp/ram
Thanks
The other thing has to do with Wifi but I will ask this in another thread if I can't figure it out by myself. :-)
This thread was automatically locked due to age.
