Hardware Specification SG135 rev1

Hallo xenon,

What do you need that's not here?

Cheers - Bob

Good Morning Bob!

Thanks for your Answer!

I am interested for the detailed Hardware Specifications like which CPU GHZ?, RAM, HDD ....

Best Regards from Austria

Mark

I found that quickly, Mark, with a Google on sophos sg 135 rev 2 cpu.  I remembered that there was a thread with the info in it.  I haven't seen whether it's the same Atom CPU in the rev.3 appliance.  I confirmed this from the command line on a client's SG 135 rev.1:

secure:/proc # cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 77
model name      : Intel(R) Atom(TM) CPU  C2558  @ 2.40GHz
stepping        : 8
microcode       : 0x128
cpu MHz         : 2400.097
cache size      : 1024 KB
physical id     : 0
siblings        : 4
core id         : 0
cpu cores       : 4
apicid          : 0
initial apicid  : 0
fpu             : yes
fpu_exception   : yes
cpuid level     : 11
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch arat epb dtherm tpr_shadow vnmi flexpriority ept vpid tsc_adjust smep erms
bogomips        : 4800.19
clflush size    : 64
cache_alignment : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:

Cheers - Bob

Hello Bob!

Thanks you are the best!

Greetz from Austria

Mark

Hallo,

I am just searching for the hardware changing from SG115 rev1 to rev2 to rev3 and same for XG115... Is there any overview for all Sophos Hardware (SG and XG)? Or is there an archive where I can get the older prospects like this one: https://www.comp4u.de/media/downloads/it-sicherheit/sophosSGSeriesappliancesbr.pdf

Hallo bene and welcome to the UTM Community!

I saw in your other thread that you're considering moving to XG.  Toni gave you good advice.  I wouldn't worry about upgrading to Rev.3 devices now, and there might be a Rev.4 or .5 when your current subscription needs to be renewed.

Cheers - Bob

I would stay away from all SG125 Rev1 and Rev2 devices...also the SG135 R1/R2....

because the used CPU in that devices has a significant failure which could knock out the whole device and they will crash permanently...such an affected device will not be able to recover it once again in worst case. It is a hardware "made by design" failure from intel and it´s just a matter from time...it´s gonna hit you one time - for sure! the higher the average workload, the more likely it is to affect you.

Ebenso Grüsse aus Österreich.

LG Andy. :)