This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM9 auf HP DL20 Gen.9 Installationsproblem

Hallo,

ich versuche grade die Software direkt auf einen HP DL20 Gen.9 Server zu installieren. 
Nach erfolgreichem booten vom USB-Stick und "Enter" drücken zum Starten der Installation, scheint es so als friert das Bild ein. Der Server reagiert nicht mehr auf Eingaben etc.
Haben schon verschiedene Versionen versucht.

Kennt jemand die Problematik?

 

Gruß



This thread was automatically locked due to age.
Parents
  • Hallo,

    (Sorry, my German-speaking brain isn't creating thoughts at the moment. [:(])

    That's a very new piece of hardware.  I wonder if the display adapter, NICs and hard drive controller are all supported.

    MfG - Bob (Bitte auf Deutsch weiterhin.)

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • Hallo,

    (Sorry, my German-speaking brain isn't creating thoughts at the moment. [:(])

    That's a very new piece of hardware.  I wonder if the display adapter, NICs and hard drive controller are all supported.

    MfG - Bob (Bitte auf Deutsch weiterhin.)

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data