This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Mails versenden auf Port 587 auf einen Mailserver hinter der UTM9

Hallo,

wir haben hinter einer ASG UTM9-409 einen Mailserver stehen. Nun kommt von Macbooks das Problem das Mails vom Internet aus über die Firewall via Port 587 auf den Mailserver gesandt werden sollen. Da dieser Port ja gem. RFC eine Authentisierung erfordert funktioniert das ganze nicht ( ASG befindet sich mailmäßig im Transparent-Mode ).

Ist es möglich den Port 587 von aussen direkt auf den Mailserver umzuleiten? Ein NAT hat nicht funktioniert.

mfg.

Hartmut



This thread was automatically locked due to age.
  • Hallo Hartmut,

    (Sorry, my German-speaking brain isn't creating thoughts at the moment. [:(])

    If you read Basic Exchange setup with SMTP Proxy, you will see that I recommend against using the SMTP Proxy in Transparent mode.  If you make that change, is your issue resolved?  You might need to add a DNAT for that traffic though.

    MfG - Bob (Bitte auf Deutsch weiterhin.)

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • Hallo,

    wir haben uns für einen anderen Port entschieden, um von aussen auf den Mailserver zu gelangen; der Port 587 ließ sich irgendwie nicht umbiegen. Trotzdem vielen Dank für die Antwort.

    mfg.

    Hartmut