This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

TLS 1.2 Mandatory setzen

Hallo zusammen,

 

die neue Europäische Datenschutzverordnung stellt uns gerade vor die Herausforderung unseren gesamten Emailverkehr nach aussen mittels TLS 1.2 zu verschlüsseln. Also den Übertragungskanal. Für uns stellt sich nun die Frage ob wir diese Verbindung mittels der Sophos UTM realisiert bekommen. In unserem Falle sollen alle Übertragungen, die nicht mittels TLS 1.2 gesichert werden können, blockiert werden. Ich weiß das es andere Compliances gibt die dies unterstützen. Daher nehme ich an das die Sophos das auch kann. Jedoch muss ich hier wissen wie man das eingestellt bekommt und was passiert wenn die Übertragung nicht statt findet. 

Wir nutzen derzeit die UTM in der Version: 9.506-2

 



This thread was automatically locked due to age.
Parents Reply Children
  • To show compliance with a mandate like this, you really need two things:  (1) a setting to cause the desired behavior in the future, and (2) log data to prove that the setting was in effect at any point in time that might be of interest to an auditor or lawyer.    Fortunately, the SMTP log shows the inbound and outbound cipher settings, if you hunt for it.   

    If you can effectively parse the SMTP logs into a database structure, you can respond to audit questions at any level of complexity.   (Look for X=... in the logs to see the way cipher information is represented.)   Also see my post from earlier today for an annotated example of the log data.

    https://community.sophos.com/products/unified-threat-management/f/management-networking-logging-and-reporting/103336/understanding-the-smtp-logs

    If Sophos is really going to help its UTM customer base with GDPR, they really need to make IView into a database tool for querying the logs, rather than leaving it in its present state as a tool for generating beautiful summary reports.   I would be reluctant to give a summary report to a manager unless I knew how to generate the supporting detail, and when I last looked at IView, it could not provide those details.

  • Wir wollen ja den Fallback verhindern. Sollte ein Server kein TLS 1.2 unterstützen dürfen dort keine Mails hin geschickt werden.
    Einen Folgeprozess dazu erarbeiten wir gerade.
  • Hallo Marc,

    das Erzwingen von TLS ist via GUI möglich, TLS 1.2 über die Konsole, siehe Post oben von Bob.

    Kommt diese Lösung Deinen Anforderungen nicht nach?

    Beste Grüße

    Alex

    -

  • Hallo Zusammen,

    wie man von mehreren Stellen lesen kann, akzeptiert Office 365 ab Oktober 2018 nur noch Mailserver die mit TLS 1.2 verschlüsseln, andere Methoden werden nicht unterstützt. Kann man denn in der GUI einstellen, das er erst TLS 1.2 prüfen soll und nur im Notfall mit TLS 1.1 oder 1.0 sendet?

    VG Uli

  • Unknown said:

    Hallo Zusammen,

    wie man von mehreren Stellen lesen kann, akzeptiert Office 365 ab Oktober 2018 nur noch Mailserver die mit TLS 1.2 verschlüsseln, andere Methoden werden nicht unterstützt. Kann man denn in der GUI einstellen, das er erst TLS 1.2 prüfen soll und nur im Notfall mit TLS 1.1 oder 1.0 sendet?

    VG Uli

     

    Genau das ist das Standardverhalten, entsprechendes Fallback TLS 1.2 -> 1.1 -> 1.0 -> unverschlüsselt.

     

    Alex

    -

  • It's possible to always require TLS.  Put "Any" in 'Require TLS Negotiation Hosts/Nets' on the 'Advanced' tab.  Careful!  Over a third of the MTAs out there today don't do TLS.  Almost 40% of domains don't have an MTA that does TLS.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • Agreed.  you neef good log parsing to know what is affected by any lockdown decision.

    i surveyed my traffic:. 2 residential ISPs and 2 important businesses were not doing encryption.   Requiring it everywhere would block a lot of important traffic.

  • Alexander Busch said:

    Hallo Marc,

    das Erzwingen von TLS ist via GUI möglich, TLS 1.2 über die Konsole, siehe Post oben von Bob.

    Kommt diese Lösung Deinen Anforderungen nicht nach?

    Beste Grüße

    Alex

     

     

    Sorry für die späte Antwort. Dies kommt schon der Anforderung nach jedoch muss die Änderung über die Console nach jedem Update erneut durchgeführt werden.

  • Ab 9.510 kann die TLS-Version über den Webmin gesetzt werden!

  • 9.510 is not yet perfected.  See Sophos UTM 9.510-4 released - let's share experiences! to confirm that one of the glitches mentioned is not a showstopper for your installation.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA