Two subnets on one interface

Hey gusy,


I´m trying to setup new subnet on used interface - eth1. Is it somehow possible to set 2 different IP ranges and on same interface without VLAN?


Thanks for any help!





  • You can set up "additional addresses" (2nd tab under "interfaces"), which mainly used for different usage of several external IPs if you have a /29 address space or sth. like that.

    You can set up completely different subnets on these additional adapters. But it's not "good network design" since both subnets share the same broadcast domain (ethernet).

  • In reply to kerobra:

    Thanks Kevin :)