Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 5 subscribers
  • Views 2867 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Accessing shares through ipsec site to site

Chris Kim

 Successfully configured site to site using ipsec.  Tunnel is runnning at bothe ends.

HQ = SG115

Remote = Sophos UTM Essential Firewall

Can't ping anything behind the SG115.  I can ping the SG115 and connect to the UTM from tunnel at Remote.

 

I want to connect to Windows Server file shares but can't.  Any ideas?  Couldn't find anything briefly on forum.  Leaning toward a DNS issue?  Any help would be appreciated.



This thread was automatically locked due to age.
Parents
  • 0

    you can't ping the name or the IP too?

    do you see the tunnel up and running?

    are the servers within the same subnet as the UTM or is an additional router between them?

    Please post a short IP plan ... like this:  PC 10.10.10.3 -- 10.10.10.1 UTM Essential 188.1.1.233 ---- internet ----- 222.222.1.1 SG125 1.1.1.1 -- Server 1.1.1.2


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

  • 0 in reply to dirkkotte

    Tunnel is up and running.  Can ping only the SG115 at 10.0.0.2

     

    Here you go.  PC 192.168.1.1 -- UTM Essential 70.176.73.33 -- Internet-- 174.70.8.178--SG115 10.0.0.2--Server 10.0.0.16

  • 0 in reply to Chris Kim

    looks good. Is firewall active at the server?


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

  • 0 in reply to dirkkotte

    Firewall is off on file server.

  • 0 in reply to Chris Kim

    you have created filewall rules allowing access from client to server at booth ends ... or selected "auto packet filter rules" within VPN definition at booth ends?

    try traceroute from server to client and client to server and post the result.


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Reply
  • 0 in reply to Chris Kim

    you have created filewall rules allowing access from client to server at booth ends ... or selected "auto packet filter rules" within VPN definition at booth ends?

    try traceroute from server to client and client to server and post the result.


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Children
No Data
Unfiltered HTML