This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

9.604 without problems?

Anybody has installed 9.604 already and being happy with it?

Best regards

Alex



This thread was automatically locked due to age.
Parents
  • Hello

    we have 2 Firewalls in HA. May I update both direct from Web Intrface? We have 6 RED 50 too outside.

    May be Problems with the updates?

    THX

    peter

  • Hallo Peter and welcome to the UTM Community!

    UPDATE 2019-07-31: See my latest post below.

    First, read the threads above.  I'm getting ready to handle a similar situation with a client.  Here's a copy of the plan I proposed:

    1. Disable the RED Servers in WebAdmin.
    2. Start the Up2Date process and wait for it to complete - probably about 10 minutes or so.  Watch on the High Availability 'Status' tab for the new Slave to be READY.
    3. At the command line, disable the use of unified wireless firmware.
    4. Enable the RED Servers in WebAdmin.

    The only disruption would be to an upload or download or VoIP call active at the moment the current Slave becomes the Master node.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • Hallo Peter and welcome to the UTM Community!

    UPDATE 2019-07-31: See my latest post below.

    First, read the threads above.  I'm getting ready to handle a similar situation with a client.  Here's a copy of the plan I proposed:

    1. Disable the RED Servers in WebAdmin.
    2. Start the Up2Date process and wait for it to complete - probably about 10 minutes or so.  Watch on the High Availability 'Status' tab for the new Slave to be READY.
    3. At the command line, disable the use of unified wireless firmware.
    4. Enable the RED Servers in WebAdmin.

    The only disruption would be to an upload or download or VoIP call active at the moment the current Slave becomes the Master node.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children