Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 7 replies
  • Answers 1 answer
  • Subscribers 6 subscribers
  • Views 59432 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to set SSL VPN Client for auto login / auto connect

JM-Dave

We are deploying the SSL VPN client to a client and whilst it works at present the user has to enter their username/password each time they connect which they will hate.

 

So the question is can the client log in with stored credentials?

To make it even more user friendly can it be configured to auto connect at start up?

 

TIA



This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to BAlfson

    I found that article but as it was talking about an Astaro client I didnt pay it much attention.

    Is there no way to use the sophos client to do this. I cant believe that Sophos would require people to enter their credentials for every login , that would drive users insane.

  • 0 in reply to JM-Dave

    That article tells you how to store the credentials and how to connect automatically when the user logs onto his Windows machine.  The UTM technology was formerly called Astaro Secure Linux, but was renamed to UTM by Sophos several years after it purchased Astaro in 2011..

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    Ah yep looks good, thanks Bob.

  • 0 in reply to BAlfson

    Unfortunately, the page you've linked to has disappeared in the sands of time.

    Is there an alternate set of instructions anyone is aware of?

     

    Paul

  • 0 in reply to Jonas92

    Thank you, that's what I was looking for.

    But I find myself confused (and for years I thought I clearly understood this issue):

    1. The link you posted says "after the windows login", and the technique it uses is in the startup tasks, which I always understood to be happen during/after user login.

    2. Looking for how to put this into the machine startup, I've discovered much ambiguity and confusion regarding whether Windows 10 "Start Up Apps" happen on machine start or user login. Many pages even say "Run on Startup / Login"! I assume they are actually at login, and all the pages that say startup are simply wrong.

    3. In my case, I need the VPN established before login, because the domain controllers are at the other end of the VPN, and I'm trying to achieve a proper, up-to-date login experience (e.g. latest GPOs etc) rather than have it use cached domain credentials (which is what it has to do if there's no tunnel to the DCs).

    4. In the past I've achieved this using System Internals "Run App as a Service" wrapper -- does that technique work in this instance?

Unfiltered HTML