Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 6 subscribers
  • Views 15943 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Swap

nimanima

Hi

we have tow ASG 525 cluster with 8.316 Firmware

some time swap usage is 100% and Ram is lower 40%

I do not why swap is 100%?

where this problem have bad effect in performance?

thanks



This thread was automatically locked due to age.
  • 0

    Hi,

    is there any reason why you haven't upgraded to the latest release?

    Any indications as to swap size might be more the issue?

    Otherwise you could search the various forums for some very long threads on swap and swap size.

    XG115W - v20 GA - Home

    XG on VM 8 - v20 GA

    If a post solves your question please use the 'Verify Answer' button.

  • 0

    old UTM's are installed with only small swapspace.

    with v9 there is a command to resize swap within running system.

    i would suggest:

    - upgrade to most current version (see

    - export backup

    - reinstall slave-node (from CD)

    - rejoin cluster / wait to sync is complete

    - reinstall other-node (from CD)

    - rejoin cluster

    you get a clean system and current partitioning

     


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

  • 0 in reply to rfcat_vk

    thanks

    we can not upgrade because we have to ASG with different hardware configuration

    in sophos froum we read that high swap is not critical when  RAM usage is low

     

  • 0 in reply to nimanima

    2017 is the last year you can renew your UTM licenses. 2018 is EOL.
    https://community.sophos.com/kb/de-de/121502

    you should consider to upgrade your hardware.

    SG550 is the recommended successor for your system.

    How different are your UTM's, so you can not upgrade?

    Cluster with different releases from one device-type should be supported with v9 too.

     


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

  • 0 in reply to dirkkotte

    one of them have 4G RAM and other one 6G

    problem is in device Revision that is different

  • 0 in reply to nimanima

    ask your sophos partner again.

    as i know different releases (with different memory) are not a problem.


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

  • 0 in reply to nimanima

    Hi, and welcome to the UTM Community!

    To really understand if you're having an issue, you need to look at top from the command line.  I bet you will see that you have a high %wa along with a high %sy on the 4GB unit.  Is this Active/Active or Active/Passive (Hot-Standby)?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Unfiltered HTML