This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM HOME INITIAL SETUP WITH ADSL ROUTER/MODEM

Installed UTM 9 on a Dell machine with two NICs. Unable to get it work. An ADSL router is setup where phone line is terminated with 4 ports for DHCP and wifi users. Need to setup so that all policies are applied to all users via UTM. Currently its a workgroup environment with ADSL router assigning IPs via two unmanaged network switches. Attaching screenshot of what router advanced LAN settings look like. All devices then get 192.168.1.x IPs. Want to use web filtering and app control



This thread was automatically locked due to age.
Parents
  • Hi and welcome,

    put the router in bridge mode, setup the UTM WAN  for DHCP add your credentials and you should see and internet connection. Assuming you can login to the UTM. 

    Basic first step is setup a firewall rule internal -> any  -> external -> any -> allow - log.

    From there you can build you firewall rules. your http proxy, your mail proxy, your dns proxy your ntp proxy and finally your ftp proxy.

    Ian

    XG115W - v20 GA - Home

    XG on VM 8 - v20 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • Hi and welcome,

    put the router in bridge mode, setup the UTM WAN  for DHCP add your credentials and you should see and internet connection. Assuming you can login to the UTM. 

    Basic first step is setup a firewall rule internal -> any  -> external -> any -> allow - log.

    From there you can build you firewall rules. your http proxy, your mail proxy, your dns proxy your ntp proxy and finally your ftp proxy.

    Ian

    XG115W - v20 GA - Home

    XG on VM 8 - v20 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
No Data