Today we've released UTM 9.510. The release will be rolled out in phases. In phase 1 you can download the update package from our FTP server, in phase 2 we will spread it via our Up2Date servers.
Update: We replaced the update from 9.509 to 9.510 on our FTP server to address two issues. We also uploaded the update for all who have installed the previous one.
Mailmanager is broken in 9.510-4
Twister, does the User Portal allow access to the SMTP Quarantine & Log for the individual user?
The link for "Release" and for "Whitelist" in User Quarantine Reports are broken since I installed this update yesterday. It seems that instead of https://sophos.domain:3840.... they simply have a http://.... lacking the "s", which leads to a "Bad Request" error.
Seems like a simple fix, though!
I expect this to come ASAP, please, so we can begin to roll out this update to our customers.
With me, Mailman is working like it should, it's only the report mails.
smtp proxy with callout verification is broken with as noted in the thread twister5800 linked to. I see a lot of errors especially with outlook.com and even other UTM 9.510 smtp proxy servers.
(renegotiation not allowed)
Could see NUTM-9836 is fixed, which coverts https links in to https links in quarantine report. New reports should get the https links. However in order to use the links from older reports, manually converting the link to https should work. Which worked for me !
@ LoveUTM: you are right, I noticed today, that only older reports have those broken links, the newly generated can be used without any problem.
So let's declare this as "half-solved". I mean: ok, it works without flaw in future, but the old reports should have worked as well. Without manually putting "https://" in the browser ...
(NUTM-9735 [Wireless] Set default channel width to 40MHz for 5GHz band) I've just applied the update manually but my APs are still using 80Mhz channel width. Does anyone know if we have to remove and re-add the APs for them to pick up the change?
NUTM-9735 will set the default channel width for factory reset device not after migration.
After Update to 9.510-5 -> Error at Start of Mail-Manager (Invalid Request)
Browser cache cleared?
meanwhile i've cleared the cache and everything is fine. Thank you
This update bricked my Sophos RED 10 rev.3 :-(
Are there any known issues, that related firmware update leeds RED 10 rev.3 to boot loop?