This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XG135 with APX320 - cant see the AP

Hello,

 

i have an XG135.

Now i want to add some APX320 to the XG135.

I connected the AP to the management network.

In th management network is a DHCP Server.

The AP is getting an IP address, but is not shown in Outstanding APs.

So i am not able to activate the AP.

What is wrong? How can i see the AP as Outstanding AP?

Best reguards

Bernd



This thread was automatically locked due to age.
Parents
  • Do you have V17.5 MR5 installed with current AP Firmware on XG? 

    Do you have "Wireless" Selected under Device Access?

    https://community.sophos.com/kb/en-us/124397

    __________________________________________________________________________________________________________________

  • I have installed 17.5.5 MR-5.

    KB124397:

    - Wireless Protection is enabled

    - Wireless Protection registration from the APs zone is allowed

    - AP gets an IP address from DHCP -> 192.168.255.102. (i am able to ping the ip)

    - The Sophos Firewall is the APs default gateway -> 192.168.255.1 

    - AP Firmware 11.0.007 on th XG, but i can't update the AP because i don't see the AP

    - Traffic is not Filtered, because it's the same network

    - Status AP: REd LED is solid

    Still not shown  

     

Reply
  • I have installed 17.5.5 MR-5.

    KB124397:

    - Wireless Protection is enabled

    - Wireless Protection registration from the APs zone is allowed

    - AP gets an IP address from DHCP -> 192.168.255.102. (i am able to ping the ip)

    - The Sophos Firewall is the APs default gateway -> 192.168.255.1 

    - AP Firmware 11.0.007 on th XG, but i can't update the AP because i don't see the AP

    - Traffic is not Filtered, because it's the same network

    - Status AP: REd LED is solid

    Still not shown  

     

Children