This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Channel selection not working for Ap100c managed in the Sophos UTM SG430

We have 21 AP100c Access Points and they are managed by the UTM SG430 with Firmware version: 9.510-5

I can change the channel for 5Ghz into another channel, but all acces points stay default at channel 36. Even when i select channel selection to 'auto' or/and Dynamic channel, it stays on 36 when i scan the area with laptop or other devices.

Reboot of Access Points and UTM doesn't change the situation, does anyone have an idea?



This thread was automatically locked due to age.
Parents
  • We have almost the exact same problem for a week or two now (as far as I know). Most of our APs are changing channels by themselves. If I set the channel to e.g. 100 it changes to 44, 36 or something else causing multiple APs on the same channel. The change takes place within a few minutes to a couple of days. It is almost impossible to select the channel myself.

    The AP list shows the channels I have selected, but if scanned with inSSIDer (or similar) the APs are using completely different channels. 2.4 Ghz is fine, only 5 Ghz has the problem.

    22 APs (AP100, AP100C, AP55, AP55C), UTM SG310, newest firmware, reboot AP or UTM makes no difference.

    This is not to hijack your thread. Just to tell that others have the same problem. Hope there is a solution.

  • Hi, thanks for your reply.

    Indeed, it is only the 5Ghz, but that's the band we use all the time.

    We use a dense formation of Acces Points, so with all the Access Points on the same channel, we suffer a lot of wireless problems.

     

    Hopefully an engineer of Sophos will respond to this post.

  • It sounds like we share the same problem and i think so too that the problem occurred a few firmware's ago.

    When i set the channel to 64, it doesn't change at all, it says on 36 or 48.

    First i thought it could have something todo with the DFS channels. The Access Points automatically selects a frequency that does not interfere with certain radar systems while operating in the 5 GHz band. 

    But even when i select a non-DFS channel, it still remains on 36 ot 48. Sometimes it will switch shortly to a pointed channel, most of the time not.

  • Good morning,

    Is there any news from the support team?

    Regards,

    Ron

  • Hi, Ron

    No. I just missed a call from them :-(

    My case has been escalated for further troubleshooting. Today has been crazy with almost all APs on ch36. I will write back.

  • Same here, 20 AP's on 36 and one on 48, hope there is a solution soon.

  • Hi again, Ron

    Had Sophos on the line for one and a half hours. We tried a few things and they saved a lot of log files. Not surprisingly, they say it's a bug, so I have to wait for them to email/call back.

    Frustrating it couldn't be solved instantly, but on the other hand, if it is a bug, it maybe just acquires an update and the problem is fixed for us all.

    Let's wait and see.

  • Hi Tiddlyfish,

    Any response yet from Sophos?

  • Hi, Ron

    They are still working on it.

  • Hi again,

    Sophos support applied a patch/possible fix two days ago, and it didn't work. Channels still changes randomly.

    This is totally unacceptable.

  • Hi Tiddlyfish,

     

    Is there any movement from Sophos to resolve this issue after the last failed patch?

     

    Regards,

    Ron

  • Hi Ron

    Sorry for the late reply. No, there is no news. Sophos support is now trying to recreate the issue on their own setup. They think now it is some combination of configurations on the utm thats causing the issue.

    It is very confusing and I am not impressed with the standards of sophos support, I must say.

    Regards,

Reply
  • Hi Ron

    Sorry for the late reply. No, there is no news. Sophos support is now trying to recreate the issue on their own setup. They think now it is some combination of configurations on the utm thats causing the issue.

    It is very confusing and I am not impressed with the standards of sophos support, I must say.

    Regards,

Children
No Data