This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos 5.6 console - forgot password and MSO, any way to recover?

Hi All,

 

If user forgot the SGN console password, is there any way to do recovery or DR?

 

 

Thanks



This thread was automatically locked due to age.
Parents
  • Do you still know the DB creds?

    I don't know if possible but I would be leaning towards installing a newer version backend and doing an upgrade on the DB.

    Are there no other Security Officers setup? Did you add any domain based SO's?

     

  • We're still figuring out what left that can be salvaged/used to recovery

     

    AFAIK none of these info available.... but will revert back

     

     

    I saw in an older thread....we need MSO and certificates backup right?

     

    community.sophos.com/.../320050

  • FormerMember
    0 FormerMember in reply to Ins007

    Hello Ins007,

    To get back in you'll need to reset the Certificate KeyStore (MSO) Password, you can do this as follows:

    1. Open the SafeGuard Certificate Manager
    2. Click the 3rd button in from the left (that says "Reset RSA private key store" when you hover over)
    3. Enter a new password and confirm
    4. Now login to the SafeGuard Management Centre and you'll be asked where the MSO certificate is
    5. Choose Yes to supply the certificate and browse for the key file (this is the .p12 file that was saved initially when creating the certificate during your installation)
    6. In the first box enter the password that was used to protect the certificate
    7. In the second box enter the password for the Certificate Store (this is the password that was just reset)
    8. Click OK and the .p12 file will be saved to the users certificate store

    You should now be able to login.

Reply
  • FormerMember
    0 FormerMember in reply to Ins007

    Hello Ins007,

    To get back in you'll need to reset the Certificate KeyStore (MSO) Password, you can do this as follows:

    1. Open the SafeGuard Certificate Manager
    2. Click the 3rd button in from the left (that says "Reset RSA private key store" when you hover over)
    3. Enter a new password and confirm
    4. Now login to the SafeGuard Management Centre and you'll be asked where the MSO certificate is
    5. Choose Yes to supply the certificate and browse for the key file (this is the .p12 file that was saved initially when creating the certificate during your installation)
    6. In the first box enter the password that was used to protect the certificate
    7. In the second box enter the password for the Certificate Store (this is the password that was just reset)
    8. Click OK and the .p12 file will be saved to the users certificate store

    You should now be able to login.

Children