This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Windows Workgroup server is not showing up in SEC

Hi,

 

 We've installed Sophos Endpoint on a workgroup server, and it is not showing up in SEC as a system (Unassigned or otherwise).

All the Sophos components were installed, and it is updating successfully.

The server name is 'RD00155D300207'

How should we proceed?

Thanks,

David



This thread was automatically locked due to age.
  • At the missing server, can you restart the Sophos Message Router service, wait 2 minutes and then post here the latest log that has been created under:

    \programdata\sophos\Remote Management System\3\router\logs\

    Regards,

    Jak

  • Hi Jak,

      Thanks, by looking at the logs it became clear that both ports 8192 & 8194 are required for connecting with SEC.

    Plus, there appears to be a dependency on the SEC host name ('a2adm2') even though we designated the update path to be its IP (10.6.1.12).

    Is there someway we can remove dependency on the hostname altogether?

    David

  • Hello David,

    updating (using SMB/UNC or HTTP) and communication (RMS, using 8192 and 8194) are independent components. An endpoint can update from whatever location (including Sophos) and also doesn't need to communicate directly with the management server - it could send its messages through a relay. Thus the updating policy and RMS specify the target address individually.

    For details on RMS please see configuring message relay computers and Using Sophos message relays in a public WAN. While they refer to relays they also describe the basic concepts and give examples on the configuration.
    dependency on the SEC host name
    by default the mrinit.conf contains IPv4,[IPv6,]FQDN,NetBIOS and RMS tries the IP first. AFAIK there's no IP if the management server doesn't have a static IP - but in this case it's expected that the endpoints can resolve the name.

    Christian 

  • did you do Discover Computer

    if not Press On Discover Computers and select Discover by IP range then must enter user name and password correct for the server that you want to show it and the ip must be in the range that you chose " in dialog user name and password don't press skip"