This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

DLP - restricting to a specific device and read only access to cameras

I need guidance to achieve the following requirements:

1. A policy to only allow a approved USB removable storage devices to be used successfully on corporate end points. We have purchased a number of secure USB devices and wish to restrict USB file copying to these devices.


2. A policy to allow usb connected cameras to copy the photos to the end point, and ensuring that files cannot be copied back to the camera.


We currently have in place some peripheral control and Data loss protection policies already in place to restrict access to removable storage. These controls need to be matured to allow for our new requirements.



This thread was automatically locked due to age.
Parents
  • Hello Necromater,

    1. you would generally block plain and Secure Removable devices and exempt those you have purchased

    2. only if the cameras can present themselves as Storage, more specifically Removable Storage, when you block MTP/PTP. R/O is not possible with MTP/PTP, only Allow or Block. But unless you want to generally allow R/O access to removable storage you'd also have to use exemptions.

    Christian

Reply
  • Hello Necromater,

    1. you would generally block plain and Secure Removable devices and exempt those you have purchased

    2. only if the cameras can present themselves as Storage, more specifically Removable Storage, when you block MTP/PTP. R/O is not possible with MTP/PTP, only Allow or Block. But unless you want to generally allow R/O access to removable storage you'd also have to use exemptions.

    Christian

Children
No Data