This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Monitor email appliance with prtg

Googmorning

we need to monitor our email appliance via smnp (we use prtg software)

Where i can find the mib for:

number of message sent

number of message receivede

numeber of messag blocked

number of message delivered

 

Thank you

 

Simone



This thread was automatically locked due to age.
  • Good morning Simone,

    You enable SNMP via the tab found at Configuration>System>Alerts & Monitoring

    The MIB can be downloaded by pressing the download MIB button on the same page.

    Please note that some functions/sensors may not be supported.

    The ESA help file can be found here:

    http://esa.sophos.com/ug/pdf/sea_ug.pdf

    The section on SNMP can be found on page 164.

    Regards,

    Neil.

  • Hi Neil,

    I tried to enable SNMP Monitoring with Community String "public" and for Network I tried different values (Subnet 10.106.166.0/24), (Net address 10.106.166.0) or (IP Address 10.106.166.103) of the connecting Client. For testing I used Peassler SNMP Tester.

    The SEA seems not to open Port 161 for SNMP Connection. I'm able to ping the SEA and I tried to connect via Telnet without susses .

     

    Do you have an advice for me?

     

    thx and regards

    Björn