This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

CR25iNG - cannot access web portal via WAN; LAN works without issue (screenshot attached)

Hi, everyone. I have a CR25iNG that is already in place and working without issue. This unit is still using Cyberoam OS. The problem is that I cannot access the web portal from the WAN, but I can access it from the LAN without issue. I can ping the WAN IP of the appliance without a problem. The HTTPS port is set to 443 right now, but it says the site cannot be reached even when I try the IP address using https:// or http://xxx.xxx.xxx.xxx:443

Here is the screenshot of my access settings:

Any ideas/suggestions? Thank you all for your time.

This thread was automatically locked due to age.

Parents

0 Keyur over 4 years ago

Hi AA27CXP

Thank you for reaching out to us.

Did you configure any Virtual Host using the public IP of the Cyberoam and forwarded all the ports? If that's the case, you would not be able to access the Cyberoam web page.

Please also verify Cyberoam certificate configuration and make sure details are filled out.

Regards,

Keyur
Community Support Engineer | Sophos Support
Sophos Support Videos | Knowledge Base | @SophosSupport | Sign up for SMS Alerts |
If a post solves your question use the 'This helped me' link
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Keyur over 4 years ago

Hi AA27CXP

Thank you for reaching out to us.

Did you configure any Virtual Host using the public IP of the Cyberoam and forwarded all the ports? If that's the case, you would not be able to access the Cyberoam web page.

Please also verify Cyberoam certificate configuration and make sure details are filled out.

Regards,

Keyur
Community Support Engineer | Sophos Support
Sophos Support Videos | Knowledge Base | @SophosSupport | Sign up for SMS Alerts |
If a post solves your question use the 'This helped me' link
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data