This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cyberoam DHCP leasing multiple subnets

With our current config, the Cyberoam CR50ing is leasing out IP address to only one subnet. As the network grows, we are planning to split our network into multiple subnets with our switches configured to do DHCP relay to the Cyberoam.

As far as I can see from the manuals and forum threads and this cannot be done with Cyberoam unless you go with multiple interfaces/VLAN.

Is my understanding correct, or there are other ways to achieve this?



This thread was automatically locked due to age.