Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 12 subscribers
  • Views 10948 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Small bug on network diagrams of KB: 118975 - Sophos UTM: How to configure IPsec Site-to-Site VPN with multipath uplink

suzzyx

Hello!

 

I recently stumbled on this KB article (118975) and noticed a small bug on the network diagrams of each scenario:

 

N:M connection with overlapping subnets

  • 192.168.10.0/24:1.1.1.1 2.2.2.2:192.168.20.0/24 IPSE over DSL/SDSL 
  • 192.168.10.0/24:1.1.1.1 4.4.4.4:192.168.20.0/23 IPSE over DSL/DSL

 

N:N internet connection

  • 192.168.10.0/24:1.1.1.1 2.2.2.2:192.168.20.0/24 IPSE over SDSL
  • 192.168.10.0/24:3.3.3.3 4.4.4.4:192.168.20.0/24 IPSE over SDSLN:M internet

 

 

In both cases, local site should have the IP Range (192.168.10.xxx) and the Remote Network (192.168.10.xxx). Unfortunatelly the network diagrams for the remote sites shows the IP range of the local site: 192.168.10.xxx, creating a bit of confusion.

It would be nice if someone could fix this.

Best Regards,



This thread was automatically locked due to age.
Parents Reply Children
No Data
Unfiltered HTML