SSP.exe creating lots of traffic

Hi,

I've recently noticed these too since upgrading to 10.6.3 on 12 April. FW logs were being flooded with these dropped connection attempts.

I logged a call and was told to disable the "Sophos System Protection Service" on a machine to see if it stopped, it did. I then received the reply at the end of this post. Just waiting to hear what the actual risks are of not allowing this traffic before I make the decision.

I also got the following information about ssp.exe:
Sophos System Protection, a new component installed in 10.6.3) uses HTTPS to perform lookups to Amazon-hosted Web servers in order to determine if processes that are connecting to external IPs/URLs/etc. without using a browser are talking to Command and Control servers. If they are, the process is quarantined and if need be, terminated. You can see the FAQ for Malicious Traffic Detection here: https://www.sophos.com/en-us/support/knowledgebase/121607.aspx
 

"Hello,

Since these machines do not have direct access to the internet, I would recommend disabling the Sophos System Protection service across your environment, as it doesn't seem like this feature will be usable unless you make some significant changes to your network.

If in the future you do want to enable this feature, you'll have to whitelist the domains referenced in here:

https://www.sophos.com/fr-fr/support/knowledgebase/117936.aspx

You'll also have to the Whitelist the Sophos Live Protect and Sophos System Protection Processes. 

Let me know if you have any further questions! 

Regards,"

On these computers without internet access, what about adding the addresses to the hosts file?

C:\ProgramData\Sophos\Sophos System Protection\Config\SXA.conf references:

https://4.sophosxl.net/lookup

C:\ProgramData\Sophos\Sophos System Protection\Config\FBA.conf references:

https://ssp.feedback.sophos.com/ssp/v1/

so "C:\Windows\System32\drivers\etc\hosts" could be updated with:

127.0.0.1  4.sophosxl.net

127.0.0.1  ssp.feedback.sophos.com

Regards,

Jak

Hi Jak,

Thanks for your reply, the URIs in those config files resolve to all the IP addresses I'm seeing traffic to.

The computers do have proxied Internet access, but strictly controlled direct access.

Once I hear back from support on the risks of disabling SSP we may decide to open up HTTPS traffic to 4.sophosxl.net, ssp.feedback.sophos.com

Many thanks,

Paul

Hi Paul,

Did you get any feedback from Support? or have you made any changes that have had a positive impact?

We are experiencing the same issue at the moment and have raised a case with Support who I'm waiting to hear back from.

Thanks

Martin

It would be best to allow https access to: 4.sophosxl.net and ssp.feedback.sophos.com

These are used by our next-gen MTD and Download Reputation features, which connect to those urls via the SSP service. In fact here's the full list of SXL addresses you should allow access to - https://community.sophos.com/kb/en-US/117936

Allowing the Endpoint software to connect to our live protection cloud gives the best possible protection. Feel free to ask if you have any further questions, Endpoint protection is my specialist subject.

Kind regards 

Craig

Hi Craig,

Thanks for the information. I have a case open with Support at the moment, opened on 28th April and finally got a response on 2nd May and still waiting for another response despite this being a fairly urgent issue. The SSP.exe service is being blamed for a major slowdown on one of our firewalls because our Infrastructure Team are seeing massive amounts of traffic (think millions of hits over a few hours) from that service on the Firewall logs.

I have been told the following:

• The SSP should establish a connection to 4.sophosxl.net on startup and then repeat that connection every 30 minutes, unless it can't establish a connection and then it will retry each of the connection methods every 30 seconds?
• It will also connect to ssp.feedback.sophos.com at startup and will then connect again once per week, unless it can't establish a connection and then it will retry each of the connection methods every 30 seconds?

Is this correct?

• If the above is true, is there a way for us to change how often the service connects and the connection method it should use?
• Can you confirm that the connection will work through an authenticated proxy so long as HTTPS traffic is allowed?
• Can you explain why a machine with Sophos 10.3.15 has SSP logs on it if SSP is a feature of 10.6? I have actually found machines with SSP logs going back to February 2016, well before 10.6 was available.
• Have any Sophos customers experienced problems with connection speeds through their firewalls or millions of connection attempts by SSP.exe since the update to 10.6?

And the most important question:

• How would we disable this service from the Enterprise Console? What feature do we need to turn off in the "Antivirus and HIPS" policy?

SSP, just to be clear:

SSP performs SXL4 online queries on behalf of the Malicious Traffic Detection and File Download Reputation features. The queries are used to determine the reputation of a file or URL. The data sent includes file names, file hashes, URLs. The SXL4 queries are done over HTTPS connections to the Sophos SXL4 server.

On startup, SSP establishes an HTTPS connection to 4.sophosxl.net, which is the Sophos SXL4 server. It does that so that the proxy is available when a SXL4 query needs to be performed. To determine a proxy, it attempts to connect to the server using three methods in parallel: direct connection (no proxy), auto proxy detection (WPAD) and system default proxy (e.g. configured with netsh), and it chooses the first one that succeeds. **We have this KBA that might be useful in this case (Ingnore the fact that it's MCS mentioned) -https://www.sophos.com/support/knowledgebase/119263.aspx

On startup, SSP also establishes a connection to ssp.feedback.sophos.com, which is the feedback server used for telemetry. For that it uses the same three methods of determining a proxy (direct connection, auto proxy detection and system default proxy). .

If a connection to either of these servers cannot be established, SSP will retry periodically every 30 seconds. This can happen for example if no Internet connection is available, or if a proxy/firewall at the edge of the network blocks HTTPS traffic to these servers.

To answer you questions (as best as I can).

Can you explain why a machine with Sophos 10.3.15 has SSP logs on it if SSP is a feature of 10.6? I have actually found machines with SSP logs going back to February 2016, well before 10.6 was available.

Without seeing the full sophos logs or even just the alupdate logs, I can't tell you exactly. But as a guess  maybe the machine was on a preview subscription and it was changed back? You will have found mentions of SSP in alupdate.log from before February, alupdate was aware of the component for a while and would look in the CID for SSP even before release, you would see this in the logs. If you really want an answer, PM me and I can take a look at your logs then we'll know.

Have any Sophos customers experienced problems with connection speeds through their firewalls or millions of connection attempts by SSP.exe since the update to 10.6?

Live protection will generate traffic, for best possible protection it should be on.We haven't seen a lot of cases for this. Allowing access out will alleviate some of the symptoms, for sure.

How would we disable this service from the Enterprise Console? What feature do we need to turn off in the "Antivirus and HIPS" policy?

You can't disable SSP from SEC. You could disable the service via GPO, but I absolutely wouldn't recommend it. Disabling the SSP service would prevent Malicious Traffic Detection, and File Download Reputation features from working.

Hi,

Thanks for the detailed reply. I've bypassed authentication on the proxy for 4.sophosxl.net and  ssp.feedback.sophos.com, which I'm happy to do as it's likely only Sophos application traffic communicating with those domains.

However, the traffic I am seeing blocked at the firewall is all to AmazonWS and this traffic stops instantly as soon as the "Sophos System Protection Service" is stopped and disabled on the monitored system.

Are we expected to bypass proxy authentication for AWS as well?

No, our products will be connecting to the domains listed, not directly to Amazon EC host-names. 

What you might be seeing is your Firewall inspecting the connection, seeing the IP the client is connecting to, performing a reverse lookup and the reverse lookup giving an EC compute hostname?

Similar to:

Hi,

Sure. Will PM you now.

Paul