Knowledge Base

This article describes the steps to remotely reboot a UTM-managed Sophos Access Point.

When you want wireless users to be part of the bridged network so they can access the internal resources as if it is local to the wireless device, you need to use Bridge to AP LAN option. This option bridges the AP to the network that is on the UTMs interface.

This article describes how to bridge an external Sophos wireless AP to a VLAN network.

This article explains what wireless mesh configurations are available for each Sophos Access Point (AP) based on whether it is used on the UTM, Sophos Firewall or Central Wireless.

Sophos SG appliances with integrated wireless may no longer broadcast SSIDs assigned to the builtin access point after upgrading to UTM 9.5. Physical APs behind any affected UTM appliances are not impacted.

This guide explains how and when to use the new flashing tool for Sophos Access Points (AP) version 15, 55 and 100.

Solution: For higher performance, select WPA2 PSK with AES encryption.

The clients will be disconnected if the time period is over.

This article provides instructions on how to configure the internal wireless card in Sophos UTM SG-W series devices using a wireless network that is bridged to the internal LAN.

The Sophos AP 100, AP 100X and AP100C uses the 802.3at (PoE+) standard and require between 13W to 15W of power.