Data Control and DLP
Endpoint Security and Control
Sophos UTM 9
Sophos Firewall Manager
Sophos iView V2
Tweets by SophosSupport
Sophos Access Point: How to recover bricked APs using the Flash Tool
Created: 27 Feb 2020
This article describes the steps to recover bricked APs using the Flash Tool.
Sophos XG Firewall: How to check the routing information of any IP address from the appliance
Created: 2 Jul 2019
This article describes how to check the routing information of any IP address in cases where there is a complex network and it is required to find out the reachability of that IP address from the appliance to understand complex network structures.
Sophos XG Firewall: How to scan SMTP connections on a custom and/or specified ports
Created: 6 Jun 2019
This article describes the steps to scan SMTP connections on a custom and/or specified ports.
Sophos XG Firewall: Log Viewer behavior
Created: 11 Apr 2018
This article describes the behavior of the Log Viewer.
Sophos XG Firewall: How the ICMP error messages works and how to allow or deny it
Created: 9 Jan 2018
This article describes how the ICMP error messages works and a use case to allow or deny ICMP error messages output.
Sophos XG Firewall: Incoming/outgoing emails in the network are blocked when SMTP scan is enabled
Created: 1 Feb 2016
This article describes how to solve the issue if incoming/outgoing emails in the network are blocked when SMTP scan is enabled.
Sophos XG Firewall: How to view the status of Sophos XG Firewall services
Created: 29 Jan 2016
During troubleshooting, you may need to check the status of a Sophos XG Firewall service or subsystem. By using the Command Line Interface (CLI) Console, you can view the status of the services or subsystems.
Sophos Firewall: How to monitor packet flow using the CLI
Created: 26 Jan 2016
You can monitor packet flow from the Sophos Firewall CLI using the tcpdump command.
Sophos XG Firewall: How to setup a Serial connection with a console cable
Created: 9 Nov 2015
This article explains how to set up a Serial connection with the Sophos XG Firewall if you are using HyperTerminal but these same settings can be applied to other terminal emulators.
Sophos XG Firewall: How to filter packets using packet capture
Created: 8 Nov 2015
Sophos XG Firewall’s packet capture utility capture packets that match the specified criteria and displays the packet's values of various fields. These fields include the connection details and the details of policies applied to the packet by each module like the Rule ID, User/Group Name, Web Filter ID, Application Filter ID, etc.