This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Bandwith Issues Chrome/Firefox/Edge

We have been using Sophos intercept x advanced with MTR for about 6 weeks. Since then, our bandwidth has dropped 90%. We use a gigabit internet connection and have previously achieved the following values ​​in a speed test in the browser: Down: 900MB/s Up: 800MB/s

Now, if we're lucky, we'll get Down: 60MB/s Up: 300MB/s.

We found out that it is due to the following settings:
 If these settings are deactivated, we have full bandwidth when surfing again. But we don't want to leave them disabled. This is not a condition, the support from Sophos is not getting anywhere either. We expected more...


here are the screenshots from the speedtest:

deactivated settings:


activated settings:




This thread was automatically locked due to age.
Parents Reply
  • Hey Guys,

    I would open a ticket with support to get early access to the driver. according to support this driver will be release in the next update,but if you don't want to wait reach out to support to get the driver.

    I've decided to just wait until the driver is released to the public.

    for systems that are affected, I've removed Sophos AV from the system until the driver is available.

    Good luck guys,

Children
No Data