This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SophosScanD process consuming up to 95% CPU

Dear,

After downgrading my MacBook Pro from Mavericks back to Snow Leopard, I re-installed Sophos Free AV. It seems to work well, except that a SophosScanD process is almost constantly - with short intermittents - using up to 95% (on average, sometimes even more than that) CPU and heating up my machine. I have completely uninstalled and then re-installed the product, from your website, but it keeps happening.

Any ideas? Please let me know if you need more information.

Regards, Hans

:1018785


This thread was automatically locked due to age.
Parents

  • gpr wrote:

    Also started experiencing this today, after many, many months of no problems.

    Upon examining the SophosScanD process, it is using 90% to 100% CPU while running, and seems to be starting, running for 10 seconds and then terminating. Then a new SophosScanD process starts after 2 seconds, running for 10 seconds, ad infinitum.

    Tried simultaneously disabling On-Access Scanning, Live Protection and both options for Web Protection, with no change.

    The system is MacOSX 10.7.5, SAV 9.0.11 (Threat detection engine 3.51.0, Threat data 5.01).


    Same problem here on MacBook Pro (Mid 2010), OSX 10.9.4 :

    The process "SophosScanD" starts, keeps running for ca. 10 secs with a CPU-load of 90%-100%, terminates and than a new process "SophosScanD" starts (new PID) again with the same behaviour.

    If anyone has an idea how to stop this weired behaviour please let me know. 

    Version 9.0.11

    Threat detection engine: 3.51.0

    Threat data: 5.01

    :1019057
Reply

  • gpr wrote:

    Also started experiencing this today, after many, many months of no problems.

    Upon examining the SophosScanD process, it is using 90% to 100% CPU while running, and seems to be starting, running for 10 seconds and then terminating. Then a new SophosScanD process starts after 2 seconds, running for 10 seconds, ad infinitum.

    Tried simultaneously disabling On-Access Scanning, Live Protection and both options for Web Protection, with no change.

    The system is MacOSX 10.7.5, SAV 9.0.11 (Threat detection engine 3.51.0, Threat data 5.01).


    Same problem here on MacBook Pro (Mid 2010), OSX 10.9.4 :

    The process "SophosScanD" starts, keeps running for ca. 10 secs with a CPU-load of 90%-100%, terminates and than a new process "SophosScanD" starts (new PID) again with the same behaviour.

    If anyone has an idea how to stop this weired behaviour please let me know. 

    Version 9.0.11

    Threat detection engine: 3.51.0

    Threat data: 5.01

    :1019057
Children
No Data